3 mins
DeepCool CG590 Mesh 2F price: $89 mesh mid‑tower with giant dual 160 mm fans
If you’ve been waiting for a wallet‑friendly airflow case, the DeepCool CG590 Mesh 2F price lands at $89. This new mid‑tower ships with two 160 mm ARGB front fans and a roomy dual‑chamber layout designed to keep powerful GPUs cool without cranking fan speeds.
Beyond the big intakes, you get support for 360 mm radiators on the top, side, or bottom, native compatibility with “back‑connect” motherboards (where most cables plug in behind the board), and front‑panel USB‑C 3.2 Gen 2. On paper, it’s a compelling base for quiet, next‑gen gaming builds.
Quick Summary
- $89 mid‑tower with two pre‑installed 160 mm ARGB intake fans and a mesh front panel.
- Radiator support up to 360 mm at top/side/bottom; up to 410 mm GPU length; back‑connect motherboard support.
- Front I/O: USB‑C 3.2 Gen 2, 2× USB‑A 3.0, combo audio; launch begins July 24, 2026 (Japan), wider rollout expected.
DeepCool CG590 Mesh 2F price and availability
DeepCool lists the CG590 Mesh 2F with an estimated retail of $89. Availability starts in Japan on July 24, 2026, with a broader global release expected after that. For readers in Canada and the U.S., final shelf pricing and dates can vary by retailer, but the positioning remains firmly in budget‑friendly territory.
Cooling layout explained
The headline feature is airflow. Two huge 160 mm front fans push a lot of air even at modest speeds, which helps reduce noise. “ARGB” means each fan’s lighting can be controlled per LED, so you can set colors and effects in your preferred software without affecting performance.
The case can mount up to 13 fans total: top (3×120 mm or 2×140 mm), front (2×160 mm), side (3×120 mm), rear (2×120 mm), and bottom (3×120 mm). If you prefer liquid cooling, radiators up to 360 mm fit on the top, side, or bottom, so you can choose the path of least resistance for airflow around your graphics card.
Image credit: DeepCool
Hardware clearance and back‑connect support
There’s room for today’s and tomorrow’s large components: up to 410 mm for GPUs, 160 mm for air coolers, and 210 mm for ATX power supplies. Storage fits up to 2× 3.5‑inch hard drives and 3× 2.5‑inch SSDs, with seven expansion slots for add‑in cards.
DeepCool also supports “back‑connect” motherboards out of the box. In simple terms, these boards move most cable plugs to the back side, so the front of your build stays cleaner and airflow to the GPU is less obstructed. There’s 45 mm of space behind the motherboard tray to route and hide cables.
A Quick Explanation
Dual‑chamber means the power supply and drives sit in a separate compartment. That keeps their heat and cables away from the main chamber, giving your graphics card and CPU a more direct stream of cool air.
Front I/O and everyday use
The top‑front panel includes a USB‑C 3.2 Gen 2 port for fast external drives and modern accessories, two USB‑A 3.0 ports, and a combined audio jack for headsets. A quick‑release top panel makes it easier to install radiators or fans, and the removable drive cage lets you free up space for longer power supplies if needed.
For planners and movers: the case measures 450 × 285 × 458 mm and weighs 6.8 kg. That’s a typical mid‑tower footprint with a bit of extra width to clear side fans and cabling without squeezing components.
Image credit: DeepCool
For PC Builders
You can choose a top, side, or bottom 360 mm radiator. Pick one main radiator path and keep the other fan mounts for intake or exhaust to maintain smooth front‑to‑back airflow around the GPU.
What’s Still Unknown
North American street date and final region‑by‑region pricing. Independent thermal and noise testing will paint the full picture once retail units land.
Who should consider it for quiet RTX 50 builds
If you’re planning a high‑power GPU, two large intakes feeding a direct path to the graphics card is exactly what you want. Bigger fans move the same air at lower speeds, which usually sounds quieter than many smaller fans spinning fast.
The flexible radiator and fan grid also makes it easy to experiment: start with the included front intakes, then add a top exhaust or a side intake aimed at the GPU. With the dual‑chamber layout keeping cables and the power supply out of the way, it’s straightforward to tune airflow for low noise.
For PC Users
Make sure your motherboard has a USB‑C front‑panel header if you want to use the case’s Type‑C port. If not, you can still run the case, but that one connector won’t be active without an adapter or a future board upgrade.
On features for the money, the CG590 Mesh 2F looks strong: two big fans included, modern I/O, roomy clearances, and multiple 360 mm mounting options for under $89. If you value cool, quiet operation and clean cable management, this mesh mid‑tower deserves a spot on your shortlist.
Image credit: DeepCool
